Product catalogue

Precision Ground Flat Stock

The material will be delivered according to DIN 59350. The thickness (top and bottom) will be delivered in ground execution, both bar ends will be saw cut. The material will have a surface roughness of max. 3.2 µ.

Tolerances
Thickness -0/+0.05 mm
Width -0/+0.20 mm
Length -0/+5,00 mm (for 500 mm lengths)
+5,00/+30.00 mm (for 1000 mm lengths)
Square +0.2/+0.2 mm

Premachined tool steel

Width and thickness will be delivered in ground, fine milled execution, both bar ends will be sawn cut. The material will have a surface roughness of max. 3.2 µ.

Tolerances
Thickness -0/+0.20 mm
Width -0/+0.40 mm
Length -0/+5,00 mm (for 500 mm lengths)
+5,00/+30.00 mm (for 1000 mm lengths)
Square +0.4/+0.4 mm

Silversteel

The material are cold drawn, annealed, ground and polished round bars without machining allowance.

Tolerances
Diameter: acc. to. ISO h8
Länge -0/+ 3,00 mm (for 300 mm lengths)
-0/+ 30,00 mm (for 1000 mm lengths)
-0/+ 50,00 mm (for 2000 mm lengths)

P-Plates

The width and length of the material is fine milled. The thickness will be delivered in circumferential ground execution.

Tolerances <= 496 mm
Thickness +0.25/0.20 mm
Width -0.00/+0.10 mm
Length 0.00/+0.10 mm

r Tolerances > 496 - <= 1196 mm
Thickness +0.35/+0.30 mm
Width -0.00/+0.15 mm
Length -0.00/ +0.15 mm

Bright steel

Round bars without machining allowance, annealed, ground and polished.

Tolerances
Diameter: acc. to. DIN EN 10278, ISO h8
Length -0/ + 30.00 mm